Author Topic: Recent Acquisition Thread  (Read 9721 times)

0 Members and 1 Guest are viewing this topic.

ZDiesel

  • Global Moderator
  • *****
  • Posts: 2155
    • Email
Recent Acquisition Thread
« on: August 10, 2009, 12:39:44 PM »
I figured this would be cool on here. There is one on Maine Airsoft, I know some of you guys don't go on to the Maine Airsoft site so I though it would be a good idea to start one on the Spartan Assault forum's as well. If a moderator could sticky this or pin it or whatever it's called lol, that would be cool. So I guess I will start with sort of a role model of what your post should look like when posting recent acquisitions. Pictures are always nice, state what you just acquired, if you want how much you got it for, where from etc...

Got some new toy's at Ghost Town...couldn't resist lol.

First up...KSC/KWA Glock 19 with a spare mag.







Second is a 4x32 Acog replica complete with full trades.








- G&G GR-16 R5 (TM EG1000, Guarder Gears, SHS 8mm Bearings, Guarder Cylinder Head, Guarder Air Nozzle, Guarder Tappet Plate, JBU cylinder, JBU spring guide, PDI 170%, Modify Piston Head, X-ring, AWS Raptor FET)
- G&G Femme Fatale

<3 li-po's <3

Joker

  • Leadership
  • *
  • Posts: 1523
  • We Owe You NOTHING
    • Email
Re: Recent Acquisition Thread
« Reply #1 on: August 10, 2009, 01:41:16 PM »
that pistol = uber sexy
Jules "Joker" Carrier
G&P M16A3
Custom CQBR *FOR SALE*
KWA USP .45

"When Jesus had called the Twelve together, he gave them power and authority to drive out all demons and to cure diseases." Luke 9:1

teresaschultz06

  • Newbie
  • *
  • Posts: 25
    • Email
Re: Recent Acquisition Thread
« Reply #2 on: August 10, 2009, 06:20:46 PM »
nice qaker life cinninim  8)


no spell check  :'(
guns:
thinking about sniper rifle
looking for a pistol or something


"if a army retreats they dont run, they find a place to make a stand"- burnnotice 8)

2:"The history of war is filled of smaller forces taking on larger ones"-burnnotice-USS Enterprize vs japan 8)

coyote

  • Expert Poster
  • **
  • Posts: 303
  • Pain Is Only Weakness Leaving The Body.
Re: Recent Acquisition Thread
« Reply #3 on: August 10, 2009, 06:52:19 PM »
i need both guns :D exspechily* the rifle to snipe teresaschultz06 ;D ;D


                                 


                                    *  d**mn spellcheck

teresaschultz06

  • Newbie
  • *
  • Posts: 25
    • Email
Re: Recent Acquisition Thread
« Reply #4 on: August 10, 2009, 09:01:07 PM »
rofl yea 8)
guns:
thinking about sniper rifle
looking for a pistol or something


"if a army retreats they dont run, they find a place to make a stand"- burnnotice 8)

2:"The history of war is filled of smaller forces taking on larger ones"-burnnotice-USS Enterprize vs japan 8)

ZDiesel

  • Global Moderator
  • *****
  • Posts: 2155
    • Email
Re: Recent Acquisition Thread
« Reply #5 on: August 10, 2009, 09:11:06 PM »
Guys. Please try to keep this on topic. Thanks.

- G&G GR-16 R5 (TM EG1000, Guarder Gears, SHS 8mm Bearings, Guarder Cylinder Head, Guarder Air Nozzle, Guarder Tappet Plate, JBU cylinder, JBU spring guide, PDI 170%, Modify Piston Head, X-ring, AWS Raptor FET)
- G&G Femme Fatale

<3 li-po's <3

coyote

  • Expert Poster
  • **
  • Posts: 303
  • Pain Is Only Weakness Leaving The Body.
Re: Recent Acquisition Thread
« Reply #6 on: August 11, 2009, 08:09:24 AM »
sorry diesel  ;D

HebrewHammer

  • Spartan Assault
  • *
  • Posts: 802
  • mess with the hebrew... get the hammer
    • Email
Re: Recent Acquisition Thread
« Reply #7 on: August 11, 2009, 10:09:39 AM »
nice qaker life cinninim  8)


no spell check  :'(

not trying to be an ass or off topic but its spelled on the box.

and those are very sexy guns

teresaschultz06

  • Newbie
  • *
  • Posts: 25
    • Email
Re: Recent Acquisition Thread
« Reply #8 on: August 11, 2009, 07:17:58 PM »
they are and im a dumb***   :(


 8)
guns:
thinking about sniper rifle
looking for a pistol or something


"if a army retreats they dont run, they find a place to make a stand"- burnnotice 8)

2:"The history of war is filled of smaller forces taking on larger ones"-burnnotice-USS Enterprize vs japan 8)

Venom

  • Newbie
  • *
  • Posts: 33
Re: Recent Acquisition Thread
« Reply #9 on: August 13, 2009, 03:47:32 PM »
how much was the acog?

ZDiesel

  • Global Moderator
  • *****
  • Posts: 2155
    • Email
Re: Recent Acquisition Thread
« Reply #10 on: August 13, 2009, 05:12:47 PM »
how much was the acog?

$100 from Federal Airsoft.

- G&G GR-16 R5 (TM EG1000, Guarder Gears, SHS 8mm Bearings, Guarder Cylinder Head, Guarder Air Nozzle, Guarder Tappet Plate, JBU cylinder, JBU spring guide, PDI 170%, Modify Piston Head, X-ring, AWS Raptor FET)
- G&G Femme Fatale

<3 li-po's <3

ZDiesel

  • Global Moderator
  • *****
  • Posts: 2155
    • Email
Re: Recent Acquisition Thread
« Reply #11 on: August 30, 2009, 12:04:39 AM »
Just ordered from ASGI.

1 x    Systema M120 spring
1 x    Systema Version 2 Non Bore Up Cylinder Head
1 x    Systema Non Bore Up Cylinder Type 2
1 x    MagPul PTS MOE Grip for M4/M16 (BLK)
1 x    OE TECH H Harness ( OD )
1 x    OE TECH Dual Kangaroo Pouch ( OD )
1 x    OE TECH MOLLE Open Top Triple M4/M16 Pouch (OD)

Also got a SR-25 suppressor and 8 MAG mid cap's from DFM.

- G&G GR-16 R5 (TM EG1000, Guarder Gears, SHS 8mm Bearings, Guarder Cylinder Head, Guarder Air Nozzle, Guarder Tappet Plate, JBU cylinder, JBU spring guide, PDI 170%, Modify Piston Head, X-ring, AWS Raptor FET)
- G&G Femme Fatale

<3 li-po's <3

Leafy

  • Expert Poster
  • **
  • Posts: 307
    • http://www.tacticalairsoft.us/viewforum.php?f=47
    • Email
Re: Recent Acquisition Thread
« Reply #12 on: August 31, 2009, 06:27:51 PM »
Upgraded Echo-1 P90. 280 FPS, 23-24 RPS with the stock 9.6v 1100 MaH battery. The gun's going to be getting some more upgrades this week to make it li-po ready. Oh, and for those of you who saw it at the last game, I just fixed the hop-up in it, so now it has like 5x the range. GREAT SUCCESS!!!

Once you see me, it's too late


ZDiesel

  • Global Moderator
  • *****
  • Posts: 2155
    • Email
Re: Recent Acquisition Thread
« Reply #13 on: August 31, 2009, 06:48:49 PM »
Nice...throw some high speed gear's, Systema turbo motor, and nice polycarb piston and that thing will really crank over.

- G&G GR-16 R5 (TM EG1000, Guarder Gears, SHS 8mm Bearings, Guarder Cylinder Head, Guarder Air Nozzle, Guarder Tappet Plate, JBU cylinder, JBU spring guide, PDI 170%, Modify Piston Head, X-ring, AWS Raptor FET)
- G&G Femme Fatale

<3 li-po's <3

Leafy

  • Expert Poster
  • **
  • Posts: 307
    • http://www.tacticalairsoft.us/viewforum.php?f=47
    • Email
Re: Recent Acquisition Thread
« Reply #14 on: August 31, 2009, 06:51:32 PM »
Running the matrix turbo, a shortened (high speed) spring, and a high speed spur gear (only one I had laying around).
Once you see me, it's too late